Classic

VSH Tectite

Equal tee, push-fit on all ends

Equal tee, push-fit on all ends

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
10mmT24CP102005022050008039£11.54
12mmT24CP101505022050008053£13.20
15mmT24CP101005022050008084£6.93
CodeDescriptiond1d2d3I1I2I3D1D2D3z1z2z3
4566110mm T24CP101010303030212121666
4566312mm T24CP121212313131232323777
4566715mm T24CP151515333333262626999
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
10mmT24CP456610.060.5811.80
12mmT24CP456630.070.659.90
15mmT24CP456670.080.868.70

Pegler Tectite Sprint, Classic, Pro and 316 Guarantee - Terms and Conditions

Products are subject to a guarantee that is between Pegler and the final purchaser of the product. When correctly assembled with the stated tubes and pipe the length of guarantee is as follows:

25 Years Where Tectite Sprint, Tectite Classic, Tectite Pro and Tectite 316 fittings, Tectite-PEX barrier pipe and 316 System tube are installed in pipelines with products from other manufacturers, they are guaranteed for 25 years.

30 Years Where pipelines are constructed exclusively using Tectite fittings and recommended tubes, the resulting installations will be deemed Tectite Systems and qualify for a 30 year guarantee.

Qualifying systems are:

  • Tectite Sprint fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite Classic fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite Pro fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite 316 fittings and stainless steel 316 System tube.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects when installed in accordance with our instructions on specified tube materials and applications, and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the Guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble–free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to installation or consequential damages.

SizePattern No.CodeBSi Kitemark LicenseDVGW_Tectite_Classic and ProETA Classic and SprintETA Tectite Classic PEXRISE Tectite ClassicSINTEF Tectite Classic
10mmT24CP45661approved by BSi Kitemark Licensenot approved by DVGW_Tectite_Classic and Pronot approved by ETA Classic and Sprintapproved by ETA Tectite Classic PEXapproved by RISE Tectite Classicapproved by SINTEF Tectite Classic
12mmT24CP45663approved by BSi Kitemark Licenseapproved by DVGW_Tectite_Classic and Pronot approved by ETA Classic and Sprintapproved by ETA Tectite Classic PEXapproved by RISE Tectite Classicapproved by SINTEF Tectite Classic
15mmT24CP45667approved by BSi Kitemark Licenseapproved by DVGW_Tectite_Classic and Proapproved by ETA Classic and Sprintapproved by ETA Tectite Classic PEXapproved by RISE Tectite Classicapproved by SINTEF Tectite Classic
Tectite FittingTube/pipe used withMin Temperature  Max Temperature
ClassicCopper-24˚C* at 16bar30˚C at16bar65˚C at 10bar95˚C at 6bar
ClassicPB/PEX-20˚C* at 12bar20˚C at 12bar65˚C at 6bar92˚C at 3bar

Care
No regular aesthetic care is required for this product

Maintenance

No regular maintenance is required for this product.

For any further help please contact the Service Support Team on: 0800 1560050.

ComponentMaterial
BodyChrome plated DZR brass
O ringEPDM
Pipe guideGlass filled nylon 6
Demount collarAcetal copolymer
Grab ringStainless steel

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Guarantee / Warranty

Approvals

Pressure & Temperature

Care & Maintenance

Installation Instructions

Material Specifications

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries